How to prevent a door from slamming in 7 Quick Fixes. 

 June 9, 2021

By  Tariq Taylor

In this guide, I’ll show you several ways to prevent a door from slamming. Nothing is more annoying than the sound of a door slamming, especially when it happens frequently.

Things can even get out of control, especially when you’re watching a movie in your home theater, working from home, or enjoying some quiet time in your Man Cave basement.

While these techniques can be more expensive than making a door handle quieter, they are affordable and easy to implement.

As I have always recommended in the past, implementing two or three recommended hacks is recommended for maximum effectiveness.

Let’s get started.

How can you prevent a door from slamming?
1. use a rubber band
A rubber band is one of the cheap and effective ways to prevent a door from slamming. To install, open the door and place the rubber band around the handle, then stretch it to reach the other side of the door.

Make sure the band extends under and over the latch while wrapping around the door. The rubber band creates a bumper so that when the door hits the frameless or no sound is created.

During installation, make sure the area around the door handle is covered, and extend it to cover the other side of the door.

A rubber band prevents the door from slamming by creating a bumper where the door meets the frame.

How to keep a door from slamminghow to keep a door from slamming

2. install a door closer
If your door rattles when someone goes out or comes in, installing a door closer is an excellent option to solve the problem. A door closer’s job is to close the door after someone opens it.

It has air-powered devices that are installed between the edge of the door and the door frame. The door closer works by using an air-filled piston to slowly swing the door as it closes.

During installation, be sure to follow the instructions carefully. There are two types of pneumatic door closers, including Wrights products V920WH and hydraulic door closers.

Wrights products are easy to install, while hydraulic closers are often used for industrial purposes.

3. check the door hinges
Worn or poorly installed hinges can cause a door to make a lot of noise when going in or out. Use a level to check that the hinges are installed correctly.

If you notice that they are uneven, you should reinstall them and if they are worn, buy new ones.

To install the hinges, you will need a hand drill to drill holes and anchor bolts. Consider calling an expert if you can’t do the job yourself.

4. Use a weather-stripping kit.

A weatherstripping kit serves two purposes at once, i.e., protecting the door and soundproofing it. Installation is simple, and you may not need a professional to do the job.

Measure the gap between the door and the frame and cut a weather strip depending on the distance, and then attach the weatherstrip.

Note that the strip comes with its adhesive, so you don’t need to buy any. Keliiyo door weather stripping is one of the effective weather stripping, and it is sold at a fair price.

5. attach felt pads to the door.
Felt pads effectively prevent a door from slamming, and are often used on the floor or counter to prevent equipment from rubbing against surfaces.

Their installation is quite simple; what you do is attach the pads to the inside of the door frame, then place two over the handle and lock.

The best part is that the felt pads come with self-adhesive surfaces that easily stick to the door.

Smart Surface 8850 Heavy-Duty Self-Adhesive Felt Pads is a great product that can be used on hardwood, ceramic tile, and linoleum.

6. use the anti-door slam products.
There is a Door Slammer Preventer that can be attached to the inside of the door to give the door a cushion. However, some products will eventually prevent the door from closing.

Attach these products from both sides of the door and cover the locking bolt to prevent it from locking inside the house.

The other option is to attach a temporary impact guard to the hinge of the door.

This mechanism will ensure that the door does not close with a noise.

Little Finger Price Guard is a great product, and it is cheap and effective. Original cushy closer Door Cushion is also a great product to prevent a door from closing unexpectedly.

7. use door seals

Door seals are fabric tubes that resemble a rolled up towel and can be placed at the bottom of a door. Their main function is to prevent drafts and odors from entering a room through the bottom of the door.

3-foot pack of 2 frosts king DS2 / window design and it fits most doors well. They come in a pair of two, and their installation requires that you just place them in front of your door.

You can use a pull stop garment under the door as they act as door seals.

8. cover the door jamb with a cushion.
The original Cushy Closer door pillow is the best to cover the jamb of your door.

The cushion is thin that it does not prevent the door from closing. It prevents the door from hitting the frame hard.

This makes it possible to open and close the door without any disturbance. If you can not get a door seal, you can use a pull stop clothing under the door.

9. protect the walls with a bumper.
Installing a bumper will protect the knob from hitting the wall, creating a dent in the wall in this area.

Bumpers are made of foams or plastic pads that are attached where the doorknob comes into contact with the wall.

Rubber door stop bumpers come in a set of 4 large self-adhesive bumpers that are transparent,and you can paint if needed.

They are affordable and very effective, and easy to install. Bumpers not only reduce the sound generated, but also protect the wall from being damaged by the door.

10. use finger pinch guards
Pinch guards are made of extra-soft foam. They are mainly used for baby proofing solutions to prevent baby fingers from getting pinched.

They effectively prevent a door from closing and do not prevent the door from opening. The six-pack door prise guards can fit around the door and over the handle.

You only need a single piece per door, so you can use the six-pack throughout your home.


Final thoughts on how to keep a door from slamming shut.
Above are some of the best tips on how to keep a door from slamming. You can combine two or three of the methods recommended above for maximum effectiveness.

However, if you want to prevent your door from slamming, I recommend a door seal or doorstop to keep the door in place.

If you want to prevent the door from slamming, use Weatherstripping, automatic door closers, or rubber banding.

If none of the recommended hacks above work, it’s time to replace your door.

Tariq Taylor

Price is the ultimate factor when deciding to purchase noise-canceling headphones, and while the above sentiments might be true Tariq Taylor is of the opinion that the merits of the soundproofing headphones are to be considered first. And that is the reason why he decided to come up with the comprehensive excerpts on soundproofing headphones. Tariq is a tech enthusiast and has been advocating for the production and use of quality tech gadgets, which includes the headphones. Tariq is married with one kid and has a massive collection of headphones that he reviews occasionally and also runs a forum where other tech experts converge to share ideas and discuss the challenges facing the tech industry.

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}